Electrostatic Charging of the Pathfinder Rover
The Mars Pathfinder mission will send a lander and a rover to the martian surface. Because of the extremely dry conditions on Mars, electrostatic charging of the rover is expected to occur as it moves about. Charge accumulation may result in high electrical potentials and discharge through the martian atmosphere. Such discharge could interfere with the operation of electrical elements on the rover. A strategy was sought to mitigate this charge accumulation as a precautionary measure. Ground tests were performed to demonstrate charging in laboratory conditions simulating the surface conditions expected at Mars. Tests showed that a rover wheel, driven at typical rover speeds, will accumulate electrical charge and develop significant electrical potentials (average observed, 110 volts). Measurements were made of wheel electrical potential, and wheel capacitance. From these quantities, the amount of absolute charge was estimated. An engineering solution was developed and recommended to mitigate charge accumulation. That solution has been implemented on the actual rover.
Related Mars Exploration Documents
1999 Marsokhod Field Experiment: A Simulation of a Mars Rover Science Mission
A field experiment to simulate a rover mission to Mars was performed in February 1999. This experiment, the latest in a series of rover field experiments, was designed to demonstrate and validate tech
A Compact Tensegrity Lander and Rover Concept for Exploration of Martian Terrains
The proposed concept is a redesign of the Tension Adjustable Network for Deploying Entry Membrane (TANDEM) tensegrity rover for a low-cost mission to Mars. Focus is on the entry, descent, landing, and
A conceptual design and operational characteristics for a Mars rover for a 1979 or 1981 Viking science mission
The feasibility of a small Mars rover for use on a 1979 or 1981 Viking mission was studied and a preliminary design concept was developed. Three variations of the concept were developed to provide com